The AQ-4105C shower filter is the perfect way to combat contaminants in shower water for healthier hair and skin. Through a 2-stage filtration method that combines Centaur Carbon Media and KDF 55 Process Media, it can reduce Chlorine and Chloramine levels by over 90%, while also removing many different synthetic compounds and VOC's. It has a rated capacity of 10,000 gallons (38,000 litres) and can last for up to 6 months once the filter has been activated, keeping replacements to a minimum.
The AQ-4105C uses a 2-stage filtration method to remove contaminants from shower water. The first layer is made up of a blend of Zinc and Copper and is known as KDF 55 Process Media. It reduces Chlorine levels and helps to balance and enhance the water's pH. The second layer consists of Centaur Carbon Media, which, like the first layer, heavily reduces Chlorine levels and removes Chloramine alongside a variety of synthetic compounds. Between these layers, the AQ-4125C filter used in the AQ-4105C system meets the NSF Certified Standards 42 and 61 and is able to reduce Chlorine levels by over 90%.
Chlorine may be a good way of keeping bacteria levels low, but unfortunately, it can lead to dry, flaky skin and straw-like, flat hair by stripping away natural protective oils. Therefore, by reducing Chlorine and Chloramine levels by over 90% with the AQ-4105C you can re-energise and revitalise both your skin and hair, keeping them hydrated for longer for smoother and softer results.
The filtration offered by the AQ-4105C also enhances hair and body washing products such as shampoos, conditioners and lotions by allowing them to lather with greater ease. This allows for less product to be used each time, saving money and time every day.
Finally, it can also heavily reduce the levels of many different synthetic compounds and VOC's (volatile organic compounds). These chemicals can vaporise in hot water, allowing them to be inhaled or absorbed through the skin, potentially causing adverse health and cosmetic effects.
The AQ-4105C has been built for easy installation and it can be put together quickly without the need for professional help. It has been designed to attach to any existing shower pipe with a 0.5 inch (1.27 cm) diameter and it screws on easily over the top with a strong watertight connection.
The AQ-4125C filter cartridge used in the AQ-4105C is easy to replace and following the recommended method it should take only a couple of minutes to complete. Each replacement cartridge is provided with a set of instructions showing the fastest method to safely remove the old cartridge and install the new one and no power tools are required to make the exchange.